GGBS Vertical Roller Mill

Applied material:
Blast-Furnace Slag, building material, limestone,slag,rock, talc, etc.
       

---

 Introduction of GGBS vertical roller mill
GGBS vertical roller mill is the equipment to grind Ground Granulated Blast furnace Slag (GGBS) into small particles.GGBS (fineness:4200-4500cm2/g) produced by vertical roller mills are being used to substitute clinker in conventional cement manufacturing as well as to partially replace OPC for ready-mixed concrete production, for which the percentage of GGBS usage is typically at 10-15% and 20-25% respectively.

---

Features:
1. Good return on investment
The widely use of slag increases the market demand to slag gradually. In recent years, investment in slag production line has been a new favorite in investment market. One production line can recover the cost in 1-3 years.
2. Reducing the power consumption of slag micro powder preparation effectively.
According to the display of slag powder production measured data, traditional ball mill needs power consumption 75~80kWh for per ton slag micro powder. However, it needs power consumption 42~45 kWh for per ton slag micro powder if adopts advanced vertical roller mill technology, and it can be saving electricity 33~35kWh use of vertical roller mill production per ton slag, and power saving effect is very remarkable.
3. Reducing the environment pollution effectively in the process of slag powder preparation.
Slag powder vertical roller mill adopts the internal negative pressure system to reduce the dust spillover effectively. The equipment adopts advanced technology with low revolving speed, stable operation, low noise, and the noise does not exceed 85dB(A) from the mill 1 meter.
4. Removing iron effectively, increasing additional income.
The advanced technology of slag vertical roller mill can be removed the iron effectively from the slag, and no less than 1% iron content can not only protect the machine, but also can increase additional income.

---

Investment income
According to association statistics, currently the world each year to produce slag the amount of over 90 million tons, steel slag utilization in 2013 less than 25% , over the past five years the cumulative amount of over 1.279 billion tons discard pile, and the number is increasing, steel companies to environmental management pose serious challenges.

Specifications

Model	Grinding Table Diameter (mm)	Roller Diameter (mm)	Roller Number (n)	Motor (kW)	Output (t/h)
GRMS26.21	2600	1600	2	1000	30
GRMS33.31	3300	1700	3	1600	50
GRMS35.31	3500	1800	3	1800	60
GRMS40.41	4000	1900	4	2240	70
GRMS43.41	4300	2120	4	2800	90
GRMS46.41	4600	2240	4	3150	105
GRMS48.41	4800	2240	4	3550	125
GRMS50.41	5000	2360	4	3800	140
GRMS53.41	5300	2500	4	4200	160
GRMS56.61	5600	2500	6	5000	180

Note: mill spectral pattern benchmark

1. Material medium friction (MFs)=0.9~1.0;
2. Material moisture max 15%;
3. Refined powder granularity 4200~4500 cm²/g;
4. Refined powder moisture 0.5~1.0%;
5. The concrete mill installed power and technology parameter will be adjusted appropritely basing on the actual material property and requirements of owner;

---

Prodction line gallery:
 
    ggbs production line                                         GRMS vertical roller mill 
            stove system                                                              dust collector

         finished products warehouse                                          control system